Skip to product information
1 of 15

Hover Equipment

Hover. The Wall Mount Ski Sample

Hover. The Wall Mount Ski Sample

Regular price ¥11,165
Regular price ¥15,950 Sale price ¥11,165
Sale Sold out
Tax included.

The first batch is expected to sell out quickly. Please note that the next batch will be available in 3 to 4 months.

Hover. The Wall Mount Ski is the perfect storage solution for your skis. It's the first product ever to display your skis on a wall while also practically drying them.

Hover. The Wall Mount Ski will get you in touch with your board and have you thinking about your next fall line.

Hang the edge of the ski at the narrowest part near the center, and then let it slide under its own weight to mount it.

Alpine Logic has specially packaged an early model wall mount that is no longer on sale due to its complex manufacturing and structure. The mounting fasteners are made of piercing screws made by Kyupiseira, a company that Japan is known for, and the world's best German-made Fischer Duo Power anchors, making this a special Japan-only set.

To install the product, download the manual from the link at the bottom of this page, or scan the QR code on the lid of the product box to display the manual. Just like Kinjiro in the Alpine Logic logo, if you read the manual carefully (important!) and have common tools, you can easily install the product. If you are unsure about how to install the product, please ask a friend who is good at DIY to help you, or ask a nearby contractor or hardware store that specializes in hardware installation work.

Product Features

  • Mount one set of skis on the wall
  • Fits ski waist widths 85mm - 135mm
  • Ski poles can be hidden behind the skis
  • Can be used for many years without damaging the skis or the main body
  • Safety: Skis won't come off even in an earthquake

What's included

  • One set of skis, The Wall Mount Ski
  • PIAS Stainless Steel (SUS410) Black Piercing Screws, 2 Pieces
  • Fischer Duo Power Plug (Anchor) x 2 *For details and specifications of Fischer Duo Power, please check the link below.

Hover. The Wall Mount Notes

  • This product requires drilling holes in the wall before installation. Please be sure to get permission from the property owner or their family before drilling holes or installing the product.
  • If you put your skis/snowboard on at an angle or put too much weight underneath it, you could scrape the sidewall.
  • Some imported products may have minor scratches during long distance transportation, but these will not affect their use.
  • Please note that Alpine Logic assumes no responsibility whatsoever for the installation of Hover. The Wall Mount.

Hover. The Wall Mount Manual

Hover. The Wall Mount Manual

Download PDF

Fischer Duo Power plug details and specifications

DUOPOWER 6x30 + Tapping Screw / Wood Screw

Applicable base material

  • Gypsum board
  • concrete
  • Concrete block
  • Brick
  • ALC
  • Natural Stone
  • plywood
  • Extruded Cement Board
  • Tiles etc.

*Please note that the type of screws used will vary depending on the type and thickness of the base material.

Construction Use

  • Drill diameter: φ6.0mm
  • Minimum drilling depth: 40mm
  • Minimum board thickness: 9.5mm
  • Minimum screw penetration depth: 35mm
  • Plug total length: 30mm
  • Suitable screw diameter: 4 - 5mm
  • Board screw diameter: 4 - 4.1mm

For architectural details such as allowable and maximum tensile loads, please refer to the manufacturer's documentation here.

fischer Duo Power Details

Regarding shipping costs (nationwide uniform ¥880)

Nationwide uniform ¥880

Free shipping for purchases over ¥20,000. (Excluding some products)

View full details