Notes on using CAST Freetour 2.0

  • Make sure to carry the Tech Toe or Pivot toe piece when not in use in your backpack.
  • To remove the toe piece, press and hold the silver release button in the center of the Base Plate and slide it backwards. Also, if there is snow or ice on the Base Plate, remove it before installing it.
  • To lock the brakes, raise the Brake Lock and press down with your boot or with your finger. To release the Brake Lock, grasp the tip of the brake and push it inward to release it.
  • Raise the lever toward you to secure the Tech Toe. When doing so, be careful not to raise the lever too much and make it stick. Two notches are usually sufficient.