Ski Drill

Ski drill with stopper for mounting ski bindings.

Outer diameter approximately 7.95mm

Lighter skis may require different installation tools, and some more expensive skis may require drill bits typically used for children's skis. Use the specified drill size if possible.

Although you probably don't need to worry about a difference of 0.1mm in drill diameter or 0.5mm in drill length, just to be safe, please use a vernier caliper to check the diameter of the included screws and the thickness from the surface of the top sheet to the running surface.

3.5 x 7.5mm: Mainly for children's skis, and La Sportiva's Vapor Svelte and Vapor Nano (164, 172)

3.5 x 9.0mm: Movement, MAJESTY

3.5 x 9.5mm: ARMADA, La Sportiva models except Vapor Svelte and Vapor Nano (164, 172)

3.6 x 9.0mm: Wood core ATOMIC (including Ultimate), MAJESTY and ELAN racing skis

3.6 x 9.5mm (not available, 3.5 x 9.5mm can be substituted): K2 wood or carbon core skis, season skis other than AERO, Black Diamond models before 2020

3.8 x 9.0mm (unavailable): A rare size found on some MAJESTY models, SKITRAB and KASTLE touring ski models.

3.8 x 9.5mm (not available): OGASAKA and VECTOR GLIDE

4.1 x 7.5mm: Mainly for junior skis and thin skis with short screws

4.1 x 9.0mm: FACTION, MAJESTY carbon or Ti, Dynafit, Hagan, Fischer, most metal-filled models. For metal-filled models , TiN Coated Ski Drill is recommended.

4.1 x 9.5mm: K2 Metal or Titanal, Season AERO, manufacturers that specify a deeper cut, or skis with metal. For skis with metal, we recommend the TiN Coated Ski Drill.