TiN Coated Ski Drill

Ski drill with stopper for mounting ski bindings.

It has a TiN coating and is used to drill holes in metal-containing plates.

After drilling, we recommend tapping the threads with 12AB3 Alpine Tap TI incoat .

Outer diameter approximately 7.95mm

Although you probably don't need to worry about a difference of 0.1mm in drill diameter or 0.5mm in drill length, just to be safe, please use a vernier caliper to check the diameter of the included screws and the thickness from the surface of the top sheet to the running surface.

3.5 x 7.5mm: Mainly for children's skis, and La Sportiva's Vapor Svelte and Vapor Nano (164, 172)

3.5 x 9.0mm: Movement, MAJESTY

3.5 x 9.5mm: ARMADA, La Sportiva models except Vapor Svelte and Vapor Nano (164, 172)

3.6 x 9.0mm: Wood core ATOMIC (including Ultimate), MAJESTY and ELAN racing skis

3.6 x 9.5mm (not available, 3.5 x 9.5mm can be substituted): K2 wood or carbon core skis, season skis other than AERO, Black Diamond models before 2020

3.8 x 9.0mm (unavailable): A rare size found on some MAJESTY models, SKITRAB and KASTLE touring ski models.

3.8 x 9.5mm (not available): OGASAKA and VECTOR GLIDE

4.1 x 7.5mm: Mainly for junior skis and thin skis with short screws

4.1 x 9.0mm: FACTION, MAJESTY carbon or Ti, Dynafit, Hagan, Fischer most metal models

4.1 x 9.5mm: K2 Metal or Titanal, season AERO, manufacturers that specify a deeper tread, or skis with metal