BINDING FREEDOM 22 Designs Outlaw / Axle / Vice Kit

This is a kit containing Binding Freedom stainless steel threaded inserts and either Pozi #3 or Torx 20 head screws.

A full set of threaded inserts and screws is 10% cheaper than purchasing the items individually.

Sets consisting of only threaded inserts or only screws are 5% cheaper than purchasing the items individually.

Compatible Bindings

• Outlaw
• Axle
• Vice

Included Products

• Threaded Inserts x 16
• Low Head (9.5mm Head) 10mm screws x 16

Notes

• Please use the specified dedicated tool and epoxy adhesive when installing the threaded inserts.
  
• Be sure to read the installation instructions on the Threaded Insert page.
• When screwing the screws into the threaded inserts, use a Pozi-Driv #3 screwdriver or bit. Using a Phillips #3 will damage the screw head.
• For T20 screws, please use a Torx 20 screwdriver or bit.
• Please apply Vibra-TITE®︎ VC-3 to the screws before use. Conventional threadlockers can melt the topsheet or binding material.