BINDING FREEDOM ATK Raider 10 / 12 / Freeraider 14 / 16 Kit

This is a kit of Binding Freedom stainless steel threaded inserts and screws with a Pozi #3 (or Torx 20) head.

A full set of threaded inserts and screws is 10% cheaper than purchasing them individually.

Sets of only threaded inserts or only screws are 5% cheaper than purchasing them individually.

*Many ATK bindings are similar models, and information is insufficient. We can determine the correct screw size from the actual product, so if your model is not listed in the compatible bindings, please contact us by email here.

Compatible Bindings

• ATK Raider 10
• ATK Raider 12
• ATK Freeraider 14
• ATK Freeraider 16

What's Included

• Threaded Insert × 16 pcs
• Flat Head T20 12mm × 16 pcs (Toe & Heel)
  

4mm Toe Shim

• Threaded Insert × 16 pcs
• Flat Head T20 16mm × 8 pcs (Toe)
• Flat Head T20 12mm × 8 pcs (Heel)
  

*This applies to the standard specifications of ATK Raider 10 / Raider 12 / Freeraider 14 / Freeraider 16.

*Older generations of Raider 2.0 / Freeraider 2.0, and the Raider EVO / Freeraider EVO series are not compatible due to different screw configurations.

Notes

• When installing Threaded Inserts, please use the specified special tool and epoxy adhesive.
  
• Please be sure to read the installation instructions on the Threaded Insert page.
• When screwing screws into threaded inserts, use a Pozi Drive #3 screwdriver or bit. Turning with a Phillips (plus) #3 will damage the groove.
• For T20 screws, use a Torx 20 screwdriver or bit.
• Apply Vibra-TITE®︎ VC-3 to the screws before use. Regular threadlockers can melt the topsheet and binding materials.

Disclaimer

The BINDING FREEDOM Binding Kit is a recommendation based on our and our customers' experience. Screw sizes may vary depending on the manufacturing year of the binding, so we cannot guarantee compatibility. We always recommend measuring the screws yourself.

We can determine the correct screw size from the actual product, so if your model is not listed in the compatible bindings, please contact us by email here.