BINDING FREEDOM CAST Freetour 1.0/2.0 Kit

Binding Freedom stainless steel thread inserts and positive #3 (or Torx 20) head screws.

A complete set of thread inserts and screws is 10% cheaper than buying them individually.

Thread insert or screw sets are 5% cheaper than buying them individually.

Compatible bindings

• CAST Freetour 1.0 Pivot 15
• CAST Freetour 1.0 Pivot 18
• CAST Freetour 2.0 Pivot 15
• CAST Freetour 2.0 Pivot 18

What's included

• Threaded Inserts x 20
• Low Head 10mm x 4
  
• Low Head 16mm x 4
• Low Head 20mm x 4
• Flat Head 16mm x 8

Precautions

• When installing the Threaded Insert, please use the specified special tool and epoxy adhesive .
  
• Be sure to read the installation instructions on the Threaded Insert page .
• Use a Pozidriv #3 screwdriver or bit to drive the screw into the thread insert. A #3 Phillips head will damage the grooves.
• For T20 screws, use a Torx 20 screwdriver or bit.
• ApplyVibra-TITE® VC-3 to the screws. Regular screw locking agents will dissolve the topsheet and binding material.