•
1 8

SVST

JigaRex™ Mounting Plate LOOK (CAST) / Rossignol

JigaRex™ Mounting Plate LOOK (CAST) / Rossignol

$73.00
$73.00
Sale Sold out

JigaRex™ Mounting Plate LOOK (CAST) / Rossignol is a replacement plate exclusively for JigaRex™ or JigaRex™ 2.0 .

Does not include JigaRex™.

This heel plate has a total of 10 holes, color-coded silver, red, and blue. To avoid making a mistake with the model, be sure to turn the plate over and check that the holes are aligned with the heel piece of the binding before drilling them.

This plate covers a wide range of bindings, so it may not include all models. If there is a model that is not listed, please contact us.

Compatible bindings

  • CAST Freetour 1.0 Pivot 15/18*
  • CAST Freetour 2.0 Pivot 15/18*
  • LOOK Pivot 12, 14, 15, 18 (2005 ~)*
  • LOOK Pivot 2.0 15, 18
  • LOOK SPX 12, 13, 14, 15
  • LOOK PX 14, 18
  • LOOK PX Racing 12, 14, 15
  • LOOK PX 18 World Cup
  • LOOK NX 7, 10, 11, 12
  • LOOK Nova 9, 10, 11
  • Rossignol FKS 120, 140, 155, 180, 185
  • Rossignol Axial 2 120, 1401 180*
  • Rossignol Axial 2 World Cup 120, 150
  • Rossignol Axial 3 120, 150
  • Rossignol Axium 90, 100, 110, 120
  • Rossignol Saphir 90, 100, 110

*CAST Freetour 1.0/2.0 Pivot 15/18 requires additional drilling using the included Brake Lock/Bail Template

*Pre-2005 LOOK Pivot or Rossignol Axial 1 will fit LOOK / Rossignol (Old) plates.

What's included

  • JigaRex™ plates (two plates on the toe and heel sides, or one plate)

Precautions when using JigaRex™

  • If you are not used to using it at first, test the mount on an old ski or piece of wood that you no longer use.
  • The center line of the JigaRex™ body is a groove carved into the rail at the center of the body.
  • When attaching to skis, turn the front and rear levers to sandwich the skis, then turn the knob in the center of the lever to firmly close and secure.
  • Turn your binding and JigaRex™ Mounting Plate upside down and make sure the holes are in the correct position.
  • Carefully check that the vertical center of the ski is aligned with the center of the JigaRex™, that the sole size of the boot matches, and that you can accurately drill holes in the same position using a template such as a paper gauge. please. Another method is to insert a pencil or pen into the hole in the plate and mark it to check the drill center.
  • The hole diameter of the plate is 8.00mm. When drilling holes in the board, always use a standard ski drill bit with a 7.95mm diameter stopper. You can purchase drill bits here .
  • As with any equipment when using JigaRex™, it is your responsibility to ensure the quality and safety of your bindings. We are not responsible for any mistakes or mistakes made during installation.

Regarding shipping costs (60 sizes)

Size 60 (Please check shipping charges at checkout)

Free shipping for purchases over ¥20,000. (Excluding some products)

View full details